Reasons You Should Consider Adhesive Bonding for Plastic Joining
Each industry tends to focus on making their products perfect. While some tend to succeed in producing great pieces of work, most tend to have problems joining these pieces together as well as repairing them. You would need to note that adhesive boding could be the best option for your industry. You would need to know some of the reasons you would need to consider adhesive bonding when it comes to plastic joining.
One of the benefits of using adhesive bonding is that it tends to improve stress distribution. In a case where you need to connect two substrates, you would need to consider using adhesive bonding. In a case where you use adhesive bonding, you tend to have an evenly distributed force across the entire bond line making the assembly even stronger. Adhesive bonding tends to strengthen the performance of your assembly by increasing shear strength.
Adhesive bonding also tends to have another plus when it comes to filling larger gaps. Shear strength tends to be best when it comes to close-fitting substrates. Adhesive bonding tends to be essential in improving the structural integrity of your assembly. It also tends to dampen the vibration or movement as well as encapsulate sensitive components. In a case where you need to use adhesive bonding on circuit board housing, cable connection, battery cells, wire harnesses, LED chip encapsulation and more, you may need to know you have the best adhesive. Some of the assemblies tend to be made to increase electrical conductivity, thermal conductivity, viscosity, chemical resistance, hardness and more.
You would also need to note that adhesive bonding tends to be the best when it comes to the provision of protective seals. In a case where you use gaskets and nuts in your assembly, you would need to note that adhesive tend to offer two for one solution. Adhesive bond tends to hold the two assemblies together like nuts do and at the same time act as a seal just like a gasket.
In a case where you want to join dissimilar substrates, you may need to consider going for adhesive bonding technology. In a case where you go for an option like welding, you tend to be left with the option of metal to metal assembly. As a result, you tend to have no option to join specific plastic to plastic or even metal to plastic. With adhesive bonding, you tend to bond even bigger types of substrates ranging from rubber to metal, glass to plastic, plastic to metal among others. The automobile industry tends to be one of the greatest beneficiaries of adhesive bonding with ferrite magnets being bonded to metal cans and also introducing new lightweight materials like composites and aluminum to the car bodies. With that in mind, you would not be limited to the substrates you can join together towards your assembly.
You would also need to remember that adhesive bonding tends to be essential when it comes to the improvement of aesthetics. Protruding fasteners and welding joints tend to be less attractive when compared to adhesive bonds since they tend to be smooth and clean lines.